r@ s r3 _swap_directionrI n sX <"4(( < < < 1t 1 1 1 2 27; <>> np.fft.fft(np.exp(2j * np.pi * np.arange(8) / 8))
array([-2.33486982e-16+1.14423775e-17j, 8.00000000e+00-1.25557246e-15j,
2.33486982e-16+2.33486982e-16j, 0.00000000e+00+1.22464680e-16j,
-1.14423775e-17+2.33486982e-16j, 0.00000000e+00+5.20784380e-16j,
1.14423775e-17+1.14423775e-17j, 0.00000000e+00+1.22464680e-16j])
In this example, real input has an FFT which is Hermitian, i.e., symmetric
in the real part and anti-symmetric in the imaginary part, as described in
the `numpy.fft` documentation:
>>> import matplotlib.pyplot as plt
>>> t = np.arange(256)
>>> sp = np.fft.fft(np.sin(t))
>>> freq = np.fft.fftfreq(t.shape[-1])
>>> plt.plot(freq, sp.real, freq, sp.imag)
[, ]
>>> plt.show()
NFTr r rA r4 r( r) r* r@ r- outputs r3 r r z sK r
Ay
GDM D))H
aD%x
8
8F Mr5 c t | } |
| j | }t || }t | ||dd| }|S )a!
Compute the one-dimensional inverse discrete Fourier Transform.
This function computes the inverse of the one-dimensional *n*-point
discrete Fourier transform computed by `fft`. In other words,
``ifft(fft(a)) == a`` to within numerical accuracy.
For a general description of the algorithm and definitions,
see `numpy.fft`.
The input should be ordered in the same way as is returned by `fft`,
i.e.,
* ``a[0]`` should contain the zero frequency term,
* ``a[1:n//2]`` should contain the positive-frequency terms,
* ``a[n//2 + 1:]`` should contain the negative-frequency terms, in
increasing order starting from the most negative frequency.
For an even number of input points, ``A[n//2]`` represents the sum of
the values at the positive and negative Nyquist frequencies, as the two
are aliased together. See `numpy.fft` for details.
Parameters
----------
a : array_like
Input array, can be complex.
n : int, optional
Length of the transformed axis of the output.
If `n` is smaller than the length of the input, the input is cropped.
If it is larger, the input is padded with zeros. If `n` is not given,
the length of the input along the axis specified by `axis` is used.
See notes about padding issues.
axis : int, optional
Axis over which to compute the inverse DFT. If not given, the last
axis is used.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axis
indicated by `axis`, or the last one if `axis` is not specified.
Raises
------
IndexError
If `axis` is not a valid axis of `a`.
See Also
--------
numpy.fft : An introduction, with definitions and general explanations.
fft : The one-dimensional (forward) FFT, of which `ifft` is the inverse
ifft2 : The two-dimensional inverse FFT.
ifftn : The n-dimensional inverse FFT.
Notes
-----
If the input parameter `n` is larger than the size of the input, the input
is padded by appending zeros at the end. Even though this is the common
approach, it might lead to surprising results. If a different padding is
desired, it must be performed before calling `ifft`.
Examples
--------
>>> np.fft.ifft([0, 4, 0, 0])
array([ 1.+0.j, 0.+1.j, -1.+0.j, 0.-1.j]) # may vary
Create and plot a band-limited signal with random phases:
>>> import matplotlib.pyplot as plt
>>> t = np.arange(400)
>>> n = np.zeros((400,), dtype=complex)
>>> n[40:60] = np.exp(1j*np.random.uniform(0, 2*np.pi, (20,)))
>>> s = np.fft.ifft(n)
>>> plt.plot(t, s.real, label='real')
[]
>>> plt.plot(t, s.imag, '--', label='imaginary')
[]
>>> plt.legend()
>>> plt.show()
NFr r rD r4 rQ s r3 r r sK z
Ay
GDM!!T**H
aD%
9
9F Mr5 c t | } |
| j | }t || }t | ||dd| }|S )a
Compute the one-dimensional discrete Fourier Transform for real input.
This function computes the one-dimensional *n*-point discrete Fourier
Transform (DFT) of a real-valued array by means of an efficient algorithm
called the Fast Fourier Transform (FFT).
Parameters
----------
a : array_like
Input array
n : int, optional
Number of points along transformation axis in the input to use.
If `n` is smaller than the length of the input, the input is cropped.
If it is larger, the input is padded with zeros. If `n` is not given,
the length of the input along the axis specified by `axis` is used.
axis : int, optional
Axis over which to compute the FFT. If not given, the last axis is
used.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axis
indicated by `axis`, or the last one if `axis` is not specified.
If `n` is even, the length of the transformed axis is ``(n/2)+1``.
If `n` is odd, the length is ``(n+1)/2``.
Raises
------
IndexError
If `axis` is not a valid axis of `a`.
See Also
--------
numpy.fft : For definition of the DFT and conventions used.
irfft : The inverse of `rfft`.
fft : The one-dimensional FFT of general (complex) input.
fftn : The *n*-dimensional FFT.
rfftn : The *n*-dimensional FFT of real input.
Notes
-----
When the DFT is computed for purely real input, the output is
Hermitian-symmetric, i.e. the negative frequency terms are just the complex
conjugates of the corresponding positive-frequency terms, and the
negative-frequency terms are therefore redundant. This function does not
compute the negative frequency terms, and the length of the transformed
axis of the output is therefore ``n//2 + 1``.
When ``A = rfft(a)`` and fs is the sampling frequency, ``A[0]`` contains
the zero-frequency term 0*fs, which is real due to Hermitian symmetry.
If `n` is even, ``A[-1]`` contains the term representing both positive
and negative Nyquist frequency (+fs/2 and -fs/2), and must also be purely
real. If `n` is odd, there is no term at fs/2; ``A[-1]`` contains
the largest positive frequency (fs/2*(n-1)/n), and is complex in the
general case.
If the input `a` contains an imaginary part, it is silently discarded.
Examples
--------
>>> np.fft.fft([0, 1, 0, 0])
array([ 1.+0.j, 0.-1.j, -1.+0.j, 0.+1.j]) # may vary
>>> np.fft.rfft([0, 1, 0, 0])
array([ 1.+0.j, 0.-1.j, -1.+0.j]) # may vary
Notice how the final element of the `fft` output is the complex conjugate
of the second element, for real input. For `rfft`, this symmetry is
exploited to compute only the non-negative frequency terms.
NTrP rQ s r3 r r @ sK j
Ay
GDM D))H
aD$h
7
7F Mr5 c t | } || j | dz
dz }t || }t | ||dd| }|S )a
Computes the inverse of `rfft`.
This function computes the inverse of the one-dimensional *n*-point
discrete Fourier Transform of real input computed by `rfft`.
In other words, ``irfft(rfft(a), len(a)) == a`` to within numerical
accuracy. (See Notes below for why ``len(a)`` is necessary here.)
The input is expected to be in the form returned by `rfft`, i.e. the
real zero-frequency term followed by the complex positive frequency terms
in order of increasing frequency. Since the discrete Fourier Transform of
real input is Hermitian-symmetric, the negative frequency terms are taken
to be the complex conjugates of the corresponding positive frequency terms.
Parameters
----------
a : array_like
The input array.
n : int, optional
Length of the transformed axis of the output.
For `n` output points, ``n//2+1`` input points are necessary. If the
input is longer than this, it is cropped. If it is shorter than this,
it is padded with zeros. If `n` is not given, it is taken to be
``2*(m-1)`` where ``m`` is the length of the input along the axis
specified by `axis`.
axis : int, optional
Axis over which to compute the inverse FFT. If not given, the last
axis is used.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : ndarray
The truncated or zero-padded input, transformed along the axis
indicated by `axis`, or the last one if `axis` is not specified.
The length of the transformed axis is `n`, or, if `n` is not given,
``2*(m-1)`` where ``m`` is the length of the transformed axis of the
input. To get an odd number of output points, `n` must be specified.
Raises
------
IndexError
If `axis` is not a valid axis of `a`.
See Also
--------
numpy.fft : For definition of the DFT and conventions used.
rfft : The one-dimensional FFT of real input, of which `irfft` is inverse.
fft : The one-dimensional FFT.
irfft2 : The inverse of the two-dimensional FFT of real input.
irfftn : The inverse of the *n*-dimensional FFT of real input.
Notes
-----
Returns the real valued `n`-point inverse discrete Fourier transform
of `a`, where `a` contains the non-negative frequency terms of a
Hermitian-symmetric sequence. `n` is the length of the result, not the
input.
If you specify an `n` such that `a` must be zero-padded or truncated, the
extra/removed values will be added/removed at high frequencies. One can
thus resample a series to `m` points via Fourier interpolation by:
``a_resamp = irfft(rfft(a), m)``.
The correct interpretation of the hermitian input depends on the length of
the original data, as given by `n`. This is because each input shape could
correspond to either an odd or even length signal. By default, `irfft`
assumes an even output length which puts the last entry at the Nyquist
frequency; aliasing with its symmetric counterpart. By Hermitian symmetry,
the value is thus treated as purely real. To avoid losing information, the
correct length of the real input **must** be given.
Examples
--------
>>> np.fft.ifft([1, -1j, -1, 1j])
array([0.+0.j, 1.+0.j, 0.+0.j, 0.+0.j]) # may vary
>>> np.fft.irfft([1, -1j, -1])
array([0., 1., 0., 0.])
Notice how the last term in the input to the ordinary `ifft` is the
complex conjugate of the second term, and the output has zero imaginary
part everywhere. When calling `irfft`, the negative frequencies are not
specified, and the output array is purely real.
Nr TFrT rQ s r3 r r sU @
Ay
WT]Q
! #!!T**H
aD$x
8
8F Mr5 c t | } || j | dz
dz }t | }t t | ||| }|S )ac
Compute the FFT of a signal that has Hermitian symmetry, i.e., a real
spectrum.
Parameters
----------
a : array_like
The input array.
n : int, optional
Length of the transformed axis of the output. For `n` output
points, ``n//2 + 1`` input points are necessary. If the input is
longer than this, it is cropped. If it is shorter than this, it is
padded with zeros. If `n` is not given, it is taken to be ``2*(m-1)``
where ``m`` is the length of the input along the axis specified by
`axis`.
axis : int, optional
Axis over which to compute the FFT. If not given, the last
axis is used.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : ndarray
The truncated or zero-padded input, transformed along the axis
indicated by `axis`, or the last one if `axis` is not specified.
The length of the transformed axis is `n`, or, if `n` is not given,
``2*m - 2`` where ``m`` is the length of the transformed axis of
the input. To get an odd number of output points, `n` must be
specified, for instance as ``2*m - 1`` in the typical case,
Raises
------
IndexError
If `axis` is not a valid axis of `a`.
See also
--------
rfft : Compute the one-dimensional FFT for real input.
ihfft : The inverse of `hfft`.
Notes
-----
`hfft`/`ihfft` are a pair analogous to `rfft`/`irfft`, but for the
opposite case: here the signal has Hermitian symmetry in the time
domain and is real in the frequency domain. So here it's `hfft` for
which you must supply the length of the result if it is to be odd.
* even: ``ihfft(hfft(a, 2*len(a) - 2)) == a``, within roundoff error,
* odd: ``ihfft(hfft(a, 2*len(a) - 1)) == a``, within roundoff error.
The correct interpretation of the hermitian input depends on the length of
the original data, as given by `n`. This is because each input shape could
correspond to either an odd or even length signal. By default, `hfft`
assumes an even output length which puts the last entry at the Nyquist
frequency; aliasing with its symmetric counterpart. By Hermitian symmetry,
the value is thus treated as purely real. To avoid losing information, the
shape of the full signal **must** be given.
Examples
--------
>>> signal = np.array([1, 2, 3, 4, 3, 2])
>>> np.fft.fft(signal)
array([15.+0.j, -4.+0.j, 0.+0.j, -1.-0.j, 0.+0.j, -4.+0.j]) # may vary
>>> np.fft.hfft(signal[:4]) # Input first half of signal
array([15., -4., 0., -1., 0., -4.])
>>> np.fft.hfft(signal, 6) # Input entire signal and truncate
array([15., -4., 0., -1., 0., -4.])
>>> signal = np.array([[1, 1.j], [-1.j, 2]])
>>> np.conj(signal.T) - signal # check Hermitian symmetry
array([[ 0.-0.j, -0.+0.j], # may vary
[ 0.+0.j, 0.-0.j]])
>>> freq_spectrum = np.fft.hfft(signal)
>>> freq_spectrum
array([[ 1., 1.],
[ 2., -2.]])
Nr rW rH )r r rI r r r( r) r* r@ new_normrR s r3 r r sX t
Ay
WT]Q
! # t$$H
9Q<<Dx
8
8
8F Mr5 c t | } |
| j | }t | }t t | ||| }|S )a
Compute the inverse FFT of a signal that has Hermitian symmetry.
Parameters
----------
a : array_like
Input array.
n : int, optional
Length of the inverse FFT, the number of points along
transformation axis in the input to use. If `n` is smaller than
the length of the input, the input is cropped. If it is larger,
the input is padded with zeros. If `n` is not given, the length of
the input along the axis specified by `axis` is used.
axis : int, optional
Axis over which to compute the inverse FFT. If not given, the last
axis is used.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axis
indicated by `axis`, or the last one if `axis` is not specified.
The length of the transformed axis is ``n//2 + 1``.
See also
--------
hfft, irfft
Notes
-----
`hfft`/`ihfft` are a pair analogous to `rfft`/`irfft`, but for the
opposite case: here the signal has Hermitian symmetry in the time
domain and is real in the frequency domain. So here it's `hfft` for
which you must supply the length of the result if it is to be odd:
* even: ``ihfft(hfft(a, 2*len(a) - 2)) == a``, within roundoff error,
* odd: ``ihfft(hfft(a, 2*len(a) - 1)) == a``, within roundoff error.
Examples
--------
>>> spectrum = np.array([ 15, -4, 0, -1, 0, -4])
>>> np.fft.ifft(spectrum)
array([1.+0.j, 2.+0.j, 3.+0.j, 4.+0.j, 3.+0.j, 2.+0.j]) # may vary
>>> np.fft.ihfft(spectrum)
array([ 1.-0.j, 2.-0.j, 3.-0.j, 4.-0.j]) # may vary
NrH )r r rI r r rY s r3 r r g sP v
Ay
GDM t$$H
tAq$X666
7
7F Mr5 c |/d}|t | j }nt | j | }nd}t | }|+t t t | d }t | t | k rt d |r |r | j |d dz
dz |d< ||fS )Nr r z&Shape and axes have different lengths.r rW )r r r ranger" r> )r( r/ axesinvreal shapelesss r3
_cook_nd_argsra s y <QW
AAQWd##AA QA |E3q66'1%%&&
1vvTABBB ,9 ,b"Q&!+" d7Nr5 c t | } t | || \ }}t t t | }| |D ] } || || || | } | S )N)r) r* r@ )r ra r r] r" reverse)r( r/ r^ functionr@ itliis r3
_raw_fftndrg s
AAq$''GAt
uSYY
CKKMMM ; ; HQ!B%d2hT : : : Hr5 c | fS rK rL r( r/ r^ r@ s r3 _fftn_dispatcherrj rN r5 c 2 t | ||t | S )a1
Compute the N-dimensional discrete Fourier Transform.
This function computes the *N*-dimensional discrete Fourier Transform over
any number of axes in an *M*-dimensional array by means of the Fast Fourier
Transform (FFT).
Parameters
----------
a : array_like
Input array, can be complex.
s : sequence of ints, optional
Shape (length of each transformed axis) of the output
(``s[0]`` refers to axis 0, ``s[1]`` to axis 1, etc.).
This corresponds to ``n`` for ``fft(x, n)``.
Along any axis, if the given shape is smaller than that of the input,
the input is cropped. If it is larger, the input is padded with zeros.
if `s` is not given, the shape of the input along the axes specified
by `axes` is used.
axes : sequence of ints, optional
Axes over which to compute the FFT. If not given, the last ``len(s)``
axes are used, or all axes if `s` is also not specified.
Repeated indices in `axes` means that the transform over that axis is
performed multiple times.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axes
indicated by `axes`, or by a combination of `s` and `a`,
as explained in the parameters section above.
Raises
------
ValueError
If `s` and `axes` have different length.
IndexError
If an element of `axes` is larger than than the number of axes of `a`.
See Also
--------
numpy.fft : Overall view of discrete Fourier transforms, with definitions
and conventions used.
ifftn : The inverse of `fftn`, the inverse *n*-dimensional FFT.
fft : The one-dimensional FFT, with definitions and conventions used.
rfftn : The *n*-dimensional FFT of real input.
fft2 : The two-dimensional FFT.
fftshift : Shifts zero-frequency terms to centre of array
Notes
-----
The output, analogously to `fft`, contains the term for zero frequency in
the low-order corner of all axes, the positive frequency terms in the
first half of all axes, the term for the Nyquist frequency in the middle
of all axes and the negative frequency terms in the second half of all
axes, in order of decreasingly negative frequency.
See `numpy.fft` for details, definitions and conventions used.
Examples
--------
>>> a = np.mgrid[:3, :3, :3][0]
>>> np.fft.fftn(a, axes=(1, 2))
array([[[ 0.+0.j, 0.+0.j, 0.+0.j], # may vary
[ 0.+0.j, 0.+0.j, 0.+0.j],
[ 0.+0.j, 0.+0.j, 0.+0.j]],
[[ 9.+0.j, 0.+0.j, 0.+0.j],
[ 0.+0.j, 0.+0.j, 0.+0.j],
[ 0.+0.j, 0.+0.j, 0.+0.j]],
[[18.+0.j, 0.+0.j, 0.+0.j],
[ 0.+0.j, 0.+0.j, 0.+0.j],
[ 0.+0.j, 0.+0.j, 0.+0.j]]])
>>> np.fft.fftn(a, (2, 2), axes=(0, 1))
array([[[ 2.+0.j, 2.+0.j, 2.+0.j], # may vary
[ 0.+0.j, 0.+0.j, 0.+0.j]],
[[-2.+0.j, -2.+0.j, -2.+0.j],
[ 0.+0.j, 0.+0.j, 0.+0.j]]])
>>> import matplotlib.pyplot as plt
>>> [X, Y] = np.meshgrid(2 * np.pi * np.arange(200) / 12,
... 2 * np.pi * np.arange(200) / 34)
>>> S = np.sin(X) + np.cos(Y) + np.random.uniform(0, 1, X.shape)
>>> FS = np.fft.fftn(S)
>>> plt.imshow(np.log(np.abs(np.fft.fftshift(FS))**2))
>>> plt.show()
rg r ri s r3 r r s H aD#t , ,,r5 c 2 t | ||t | S )a
Compute the N-dimensional inverse discrete Fourier Transform.
This function computes the inverse of the N-dimensional discrete
Fourier Transform over any number of axes in an M-dimensional array by
means of the Fast Fourier Transform (FFT). In other words,
``ifftn(fftn(a)) == a`` to within numerical accuracy.
For a description of the definitions and conventions used, see `numpy.fft`.
The input, analogously to `ifft`, should be ordered in the same way as is
returned by `fftn`, i.e. it should have the term for zero frequency
in all axes in the low-order corner, the positive frequency terms in the
first half of all axes, the term for the Nyquist frequency in the middle
of all axes and the negative frequency terms in the second half of all
axes, in order of decreasingly negative frequency.
Parameters
----------
a : array_like
Input array, can be complex.
s : sequence of ints, optional
Shape (length of each transformed axis) of the output
(``s[0]`` refers to axis 0, ``s[1]`` to axis 1, etc.).
This corresponds to ``n`` for ``ifft(x, n)``.
Along any axis, if the given shape is smaller than that of the input,
the input is cropped. If it is larger, the input is padded with zeros.
if `s` is not given, the shape of the input along the axes specified
by `axes` is used. See notes for issue on `ifft` zero padding.
axes : sequence of ints, optional
Axes over which to compute the IFFT. If not given, the last ``len(s)``
axes are used, or all axes if `s` is also not specified.
Repeated indices in `axes` means that the inverse transform over that
axis is performed multiple times.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axes
indicated by `axes`, or by a combination of `s` or `a`,
as explained in the parameters section above.
Raises
------
ValueError
If `s` and `axes` have different length.
IndexError
If an element of `axes` is larger than than the number of axes of `a`.
See Also
--------
numpy.fft : Overall view of discrete Fourier transforms, with definitions
and conventions used.
fftn : The forward *n*-dimensional FFT, of which `ifftn` is the inverse.
ifft : The one-dimensional inverse FFT.
ifft2 : The two-dimensional inverse FFT.
ifftshift : Undoes `fftshift`, shifts zero-frequency terms to beginning
of array.
Notes
-----
See `numpy.fft` for definitions and conventions used.
Zero-padding, analogously with `ifft`, is performed by appending zeros to
the input along the specified dimension. Although this is the common
approach, it might lead to surprising results. If another form of zero
padding is desired, it must be performed before `ifftn` is called.
Examples
--------
>>> a = np.eye(4)
>>> np.fft.ifftn(np.fft.fftn(a, axes=(0,)), axes=(1,))
array([[1.+0.j, 0.+0.j, 0.+0.j, 0.+0.j], # may vary
[0.+0.j, 1.+0.j, 0.+0.j, 0.+0.j],
[0.+0.j, 0.+0.j, 1.+0.j, 0.+0.j],
[0.+0.j, 0.+0.j, 0.+0.j, 1.+0.j]])
Create and plot an image with band-limited frequency content:
>>> import matplotlib.pyplot as plt
>>> n = np.zeros((200,200), dtype=complex)
>>> n[60:80, 20:40] = np.exp(1j*np.random.uniform(0, 2*np.pi, (20, 20)))
>>> im = np.fft.ifftn(n).real
>>> plt.imshow(im)
>>> plt.show()
rg r ri s r3 r r 2 s H aD$ - --r5 r c 2 t | ||t | S )a
Compute the 2-dimensional discrete Fourier Transform.
This function computes the *n*-dimensional discrete Fourier Transform
over any axes in an *M*-dimensional array by means of the
Fast Fourier Transform (FFT). By default, the transform is computed over
the last two axes of the input array, i.e., a 2-dimensional FFT.
Parameters
----------
a : array_like
Input array, can be complex
s : sequence of ints, optional
Shape (length of each transformed axis) of the output
(``s[0]`` refers to axis 0, ``s[1]`` to axis 1, etc.).
This corresponds to ``n`` for ``fft(x, n)``.
Along each axis, if the given shape is smaller than that of the input,
the input is cropped. If it is larger, the input is padded with zeros.
if `s` is not given, the shape of the input along the axes specified
by `axes` is used.
axes : sequence of ints, optional
Axes over which to compute the FFT. If not given, the last two
axes are used. A repeated index in `axes` means the transform over
that axis is performed multiple times. A one-element sequence means
that a one-dimensional FFT is performed.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axes
indicated by `axes`, or the last two axes if `axes` is not given.
Raises
------
ValueError
If `s` and `axes` have different length, or `axes` not given and
``len(s) != 2``.
IndexError
If an element of `axes` is larger than than the number of axes of `a`.
See Also
--------
numpy.fft : Overall view of discrete Fourier transforms, with definitions
and conventions used.
ifft2 : The inverse two-dimensional FFT.
fft : The one-dimensional FFT.
fftn : The *n*-dimensional FFT.
fftshift : Shifts zero-frequency terms to the center of the array.
For two-dimensional input, swaps first and third quadrants, and second
and fourth quadrants.
Notes
-----
`fft2` is just `fftn` with a different default for `axes`.
The output, analogously to `fft`, contains the term for zero frequency in
the low-order corner of the transformed axes, the positive frequency terms
in the first half of these axes, the term for the Nyquist frequency in the
middle of the axes and the negative frequency terms in the second half of
the axes, in order of decreasingly negative frequency.
See `fftn` for details and a plotting example, and `numpy.fft` for
definitions and conventions used.
Examples
--------
>>> a = np.mgrid[:5, :5][0]
>>> np.fft.fft2(a)
array([[ 50. +0.j , 0. +0.j , 0. +0.j , # may vary
0. +0.j , 0. +0.j ],
[-12.5+17.20477401j, 0. +0.j , 0. +0.j ,
0. +0.j , 0. +0.j ],
[-12.5 +4.0614962j , 0. +0.j , 0. +0.j ,
0. +0.j , 0. +0.j ],
[-12.5 -4.0614962j , 0. +0.j , 0. +0.j ,
0. +0.j , 0. +0.j ],
[-12.5-17.20477401j, 0. +0.j , 0. +0.j ,
0. +0.j , 0. +0.j ]])
rl ri s r3 r r s z aD#t , ,,r5 c 2 t | ||t | S )at
Compute the 2-dimensional inverse discrete Fourier Transform.
This function computes the inverse of the 2-dimensional discrete Fourier
Transform over any number of axes in an M-dimensional array by means of
the Fast Fourier Transform (FFT). In other words, ``ifft2(fft2(a)) == a``
to within numerical accuracy. By default, the inverse transform is
computed over the last two axes of the input array.
The input, analogously to `ifft`, should be ordered in the same way as is
returned by `fft2`, i.e. it should have the term for zero frequency
in the low-order corner of the two axes, the positive frequency terms in
the first half of these axes, the term for the Nyquist frequency in the
middle of the axes and the negative frequency terms in the second half of
both axes, in order of decreasingly negative frequency.
Parameters
----------
a : array_like
Input array, can be complex.
s : sequence of ints, optional
Shape (length of each axis) of the output (``s[0]`` refers to axis 0,
``s[1]`` to axis 1, etc.). This corresponds to `n` for ``ifft(x, n)``.
Along each axis, if the given shape is smaller than that of the input,
the input is cropped. If it is larger, the input is padded with zeros.
if `s` is not given, the shape of the input along the axes specified
by `axes` is used. See notes for issue on `ifft` zero padding.
axes : sequence of ints, optional
Axes over which to compute the FFT. If not given, the last two
axes are used. A repeated index in `axes` means the transform over
that axis is performed multiple times. A one-element sequence means
that a one-dimensional FFT is performed.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axes
indicated by `axes`, or the last two axes if `axes` is not given.
Raises
------
ValueError
If `s` and `axes` have different length, or `axes` not given and
``len(s) != 2``.
IndexError
If an element of `axes` is larger than than the number of axes of `a`.
See Also
--------
numpy.fft : Overall view of discrete Fourier transforms, with definitions
and conventions used.
fft2 : The forward 2-dimensional FFT, of which `ifft2` is the inverse.
ifftn : The inverse of the *n*-dimensional FFT.
fft : The one-dimensional FFT.
ifft : The one-dimensional inverse FFT.
Notes
-----
`ifft2` is just `ifftn` with a different default for `axes`.
See `ifftn` for details and a plotting example, and `numpy.fft` for
definition and conventions used.
Zero-padding, analogously with `ifft`, is performed by appending zeros to
the input along the specified dimension. Although this is the common
approach, it might lead to surprising results. If another form of zero
padding is desired, it must be performed before `ifft2` is called.
Examples
--------
>>> a = 4 * np.eye(4)
>>> np.fft.ifft2(a)
array([[1.+0.j, 0.+0.j, 0.+0.j, 0.+0.j], # may vary
[0.+0.j, 0.+0.j, 0.+0.j, 1.+0.j],
[0.+0.j, 0.+0.j, 1.+0.j, 0.+0.j],
[0.+0.j, 1.+0.j, 0.+0.j, 0.+0.j]])
rn ri s r3 r
r
s t aD$ - --r5 c t | } t | || \ }}t | |d |d | } t t | dz
D ] }t | || || | } !| S )a;
Compute the N-dimensional discrete Fourier Transform for real input.
This function computes the N-dimensional discrete Fourier Transform over
any number of axes in an M-dimensional real array by means of the Fast
Fourier Transform (FFT). By default, all axes are transformed, with the
real transform performed over the last axis, while the remaining
transforms are complex.
Parameters
----------
a : array_like
Input array, taken to be real.
s : sequence of ints, optional
Shape (length along each transformed axis) to use from the input.
(``s[0]`` refers to axis 0, ``s[1]`` to axis 1, etc.).
The final element of `s` corresponds to `n` for ``rfft(x, n)``, while
for the remaining axes, it corresponds to `n` for ``fft(x, n)``.
Along any axis, if the given shape is smaller than that of the input,
the input is cropped. If it is larger, the input is padded with zeros.
if `s` is not given, the shape of the input along the axes specified
by `axes` is used.
axes : sequence of ints, optional
Axes over which to compute the FFT. If not given, the last ``len(s)``
axes are used, or all axes if `s` is also not specified.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : complex ndarray
The truncated or zero-padded input, transformed along the axes
indicated by `axes`, or by a combination of `s` and `a`,
as explained in the parameters section above.
The length of the last axis transformed will be ``s[-1]//2+1``,
while the remaining transformed axes will have lengths according to
`s`, or unchanged from the input.
Raises
------
ValueError
If `s` and `axes` have different length.
IndexError
If an element of `axes` is larger than than the number of axes of `a`.
See Also
--------
irfftn : The inverse of `rfftn`, i.e. the inverse of the n-dimensional FFT
of real input.
fft : The one-dimensional FFT, with definitions and conventions used.
rfft : The one-dimensional FFT of real input.
fftn : The n-dimensional FFT.
rfft2 : The two-dimensional FFT of real input.
Notes
-----
The transform for real input is performed over the last transformation
axis, as by `rfft`, then the transform over the remaining axes is
performed as by `fftn`. The order of the output is as for `rfft` for the
final transformation axis, and as for `fftn` for the remaining
transformation axes.
See `fft` for details, definitions and conventions used.
Examples
--------
>>> a = np.ones((2, 2, 2))
>>> np.fft.rfftn(a)
array([[[8.+0.j, 0.+0.j], # may vary
[0.+0.j, 0.+0.j]],
[[0.+0.j, 0.+0.j],
[0.+0.j, 0.+0.j]]])
>>> np.fft.rfftn(a, axes=(2, 0))
array([[[4.+0.j, 0.+0.j], # may vary
[4.+0.j, 0.+0.j]],
[[0.+0.j, 0.+0.j],
[0.+0.j, 0.+0.j]]])
r r )r ra r r] r" r r( r/ r^ r@ rf s r3 r r V s t
AAq$''GAt Q"tBx&&ACIIaK * * 1R5$r(D ) ) Hr5 c & t | ||| S )a
Compute the 2-dimensional FFT of a real array.
Parameters
----------
a : array
Input array, taken to be real.
s : sequence of ints, optional
Shape of the FFT.
axes : sequence of ints, optional
Axes over which to compute the FFT.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : ndarray
The result of the real 2-D FFT.
See Also
--------
rfftn : Compute the N-dimensional discrete Fourier Transform for real
input.
Notes
-----
This is really just `rfftn` with different default behavior.
For more details see `rfftn`.
Examples
--------
>>> a = np.mgrid[:5, :5][0]
>>> np.fft.rfft2(a)
array([[ 50. +0.j , 0. +0.j , 0. +0.j ],
[-12.5+17.20477401j, 0. +0.j , 0. +0.j ],
[-12.5 +4.0614962j , 0. +0.j , 0. +0.j ],
[-12.5 -4.0614962j , 0. +0.j , 0. +0.j ],
[-12.5-17.20477401j, 0. +0.j , 0. +0.j ]])
)r ri s r3 r
r
s b AtT " ""r5 c t | } t | ||d \ }}t t | dz
D ] }t | || || | } !t | |d |d | } | S )a
Computes the inverse of `rfftn`.
This function computes the inverse of the N-dimensional discrete
Fourier Transform for real input over any number of axes in an
M-dimensional array by means of the Fast Fourier Transform (FFT). In
other words, ``irfftn(rfftn(a), a.shape) == a`` to within numerical
accuracy. (The ``a.shape`` is necessary like ``len(a)`` is for `irfft`,
and for the same reason.)
The input should be ordered in the same way as is returned by `rfftn`,
i.e. as for `irfft` for the final transformation axis, and as for `ifftn`
along all the other axes.
Parameters
----------
a : array_like
Input array.
s : sequence of ints, optional
Shape (length of each transformed axis) of the output
(``s[0]`` refers to axis 0, ``s[1]`` to axis 1, etc.). `s` is also the
number of input points used along this axis, except for the last axis,
where ``s[-1]//2+1`` points of the input are used.
Along any axis, if the shape indicated by `s` is smaller than that of
the input, the input is cropped. If it is larger, the input is padded
with zeros. If `s` is not given, the shape of the input along the axes
specified by axes is used. Except for the last axis which is taken to
be ``2*(m-1)`` where ``m`` is the length of the input along that axis.
axes : sequence of ints, optional
Axes over which to compute the inverse FFT. If not given, the last
`len(s)` axes are used, or all axes if `s` is also not specified.
Repeated indices in `axes` means that the inverse transform over that
axis is performed multiple times.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : ndarray
The truncated or zero-padded input, transformed along the axes
indicated by `axes`, or by a combination of `s` or `a`,
as explained in the parameters section above.
The length of each transformed axis is as given by the corresponding
element of `s`, or the length of the input in every axis except for the
last one if `s` is not given. In the final transformed axis the length
of the output when `s` is not given is ``2*(m-1)`` where ``m`` is the
length of the final transformed axis of the input. To get an odd
number of output points in the final axis, `s` must be specified.
Raises
------
ValueError
If `s` and `axes` have different length.
IndexError
If an element of `axes` is larger than than the number of axes of `a`.
See Also
--------
rfftn : The forward n-dimensional FFT of real input,
of which `ifftn` is the inverse.
fft : The one-dimensional FFT, with definitions and conventions used.
irfft : The inverse of the one-dimensional FFT of real input.
irfft2 : The inverse of the two-dimensional FFT of real input.
Notes
-----
See `fft` for definitions and conventions used.
See `rfft` for definitions and conventions used for real input.
The correct interpretation of the hermitian input depends on the shape of
the original data, as given by `s`. This is because each input shape could
correspond to either an odd or even length signal. By default, `irfftn`
assumes an even output length which puts the last entry at the Nyquist
frequency; aliasing with its symmetric counterpart. When performing the
final complex to real transform, the last value is thus treated as purely
real. To avoid losing information, the correct shape of the real input
**must** be given.
Examples
--------
>>> a = np.zeros((3, 2, 2))
>>> a[0, 0, 0] = 3 * 2 * 2
>>> np.fft.irfftn(a)
array([[[1., 1.],
[1., 1.]],
[[1., 1.],
[1., 1.]],
[[1., 1.],
[1., 1.]]])
r )r_ r )r ra r] r" r r rt s r3 r r s L
AAq$222GAtCIIaK + + AbE48T * *
a2R$''A Hr5 c & t | ||| S )a
Computes the inverse of `rfft2`.
Parameters
----------
a : array_like
The input array
s : sequence of ints, optional
Shape of the real output to the inverse FFT.
axes : sequence of ints, optional
The axes over which to compute the inverse fft.
Default is the last two axes.
norm : {"backward", "ortho", "forward"}, optional
.. versionadded:: 1.10.0
Normalization mode (see `numpy.fft`). Default is "backward".
Indicates which direction of the forward/backward pair of transforms
is scaled and with what normalization factor.
.. versionadded:: 1.20.0
The "backward", "forward" values were added.
Returns
-------
out : ndarray
The result of the inverse real 2-D FFT.
See Also
--------
rfft2 : The forward two-dimensional FFT of real input,
of which `irfft2` is the inverse.
rfft : The one-dimensional FFT for real input.
irfft : The inverse of the one-dimensional FFT of real input.
irfftn : Compute the inverse of the N-dimensional FFT of real input.
Notes
-----
This is really `irfftn` with different defaults.
For more details see `irfftn`.
Examples
--------
>>> a = np.mgrid[:5, :5][0]
>>> A = np.fft.rfft2(a)
>>> np.fft.irfft2(A, s=a.shape)
array([[0., 0., 0., 0., 0.],
[1., 1., 1., 1., 1.],
[2., 2., 2., 2., 2.],
[3., 3., 3., 3., 3.],
[4., 4., 4., 4., 4.]])
)r ri s r3 r r Z s l !Qd # ##r5 )NNN)Nr N)NNr )Nro N))__doc____all__ functools
numpy.corer r r r r r r r& numpy.core.multiarrayr r partialarray_function_dispatchr4 rA rD rF rI rM r r r r r r ra rg rj r r r r
r r
r r rL r5 r3 r s : J J J F F F F F F F F F F F F F F F F ( ( ( ( ( ( 6 6 6 6 6 6 ,)+
%k; ; ;
: . . . . . . $-I 'J@ @ < < < ))] ] ] *)]@ ))a a a *)aH ))Y Y Y *)Yx ))d d d *)dN ))^ ^ ^ *)^B ))? ? ? *)?D & tc
)**c- c- c- +*c-L )**c. c. c. +*c.L )**\- \- \- +*\-~ )**Y. Y. Y. +*Y.x )**^
^
^
+*^
B )**0# 0# 0# +*0#f )**j
j
j
+*j
Z )**5$ 5$ 5$ +*5$ 5$ 5$r5